amsung unveiled its flagship S series smartphones consisting of - Galaxy S10e, Galaxy S10 and Galaxy S10+ -- earlier this year. After the launch of its premium budget flagship device, it is time that we shift our focus to the next big launch by the Korean electronics giant -- the Samsung Galaxy Note 10. Conventionally, Samsung launches a single variant of its Galaxy Note series every year. But this year reports indicate that Samsung is planning to divulge from the norm and release two variants of its upcoming device - one is the Galaxy Note 10 and the other is the Galaxy Note 10 Pro.

In the past couple of weeks, we have heard a lot about the Galaxy Note 10 and now we have some word on what the Pro variant of the device would bring to the table. OnLeaks in collaboration with the PriceBaba has published the leak-based CAD renders of the Samsung Galaxy Note 10 Pro. These images give a 360-degree view of Samsung's upcoming device.

According to the CAD renders of the Galaxy Note 10 Pro, the device would come with glass sandwich design that would give a premium appeal. It would come with a punch hole display with a single camera in the front. The camera placement in Galaxy Note 10 Pro is a stark diversion from the Galaxy S10 series where in the front camera in placed on the right side of the display.

On the back, there is a vertically stacked quad rear camera setup with three cameras and the fourth ToF lens. While the setup is quite similar to the Galaxy S10 5G, the placement of the rear cameras is another point of difference between the Galaxy Note 10 series and the Galaxy S10 series. Interestingly, the Galaxy Note 10 Pro seems to be missing a button to invoke Bixby. While there are a set of buttons - volume control keys and power button - on the left side of the device, the right side of the device seems to be all flat. There is a USB-C port, the speaker grille and the S-Pen on the bottom. But there seems to be no room for the 3.5mm jack.

In addition to this, the absence of a physical fingerprint sensor in the renders seems to indicate that the Galaxy Note 10 Pro will come with an in-display fingerprint sensor which is similar to the ultrasonic sensor that is present in the Galaxy S10 series.

Overall, the Samsung Galaxy Note 10 Pro will measure 162.3 x 77.4 x 7.9mm with a thickness of 8.5mm near the rear camera bump, Pricebaba revealed. It is likely to come with a 6.75-inch Dynamic AMOLED edge-to-edge display with a resolution of 1440x3030 pixels. It is likely to be powered by Qualcomm Snapdragon 855 or Exynos 9820 processor and be backed by up to 12GB RAM and 4,500mAh battery.